[Immersive Listening Motivator] Red Rock Sound Inspirer v1.0.0 [WIN] (8.12MB)

BUBBiX | 23 November 2024 | 8.12 MB

Installation method:After installation, replace theplug-in (software component)The

Inspirer Immersive Listening Motivator
The Red Rock Sound Inspirer plug-in was developed to meet the growing demand for maximum apparent loudness in contemporary immersive music mixing.

While many existing techniques rely on compression and limiting to enhance modulation and create exciting sounds, Inspirer goes one step further. It can enhance the loudness of virtually any audio material, regardless of previous compression or dynamic range. In addition, Inspirer gives analog consoles their inherent warmth and character. Use

Designed from the ground up to save time and avoid tedious manual work, the Inspirer plug-in allows for fast, efficient processing of center/side, stereo and object, beds for immersive mixing environments (fixed channels).

staircase (for residential buildings)
This module allows you to select one of the four available auditory exciters. The auditory exciters are arranged in series, which allows you to use different exciter settings for processing channels.
For example: the first auditory exciter is center channel only, the second auditory exciter is side channel only, the third auditory exciter is LFE. For multichannel mode: the first auditory exciter is left and right channel only, the second auditory exciter is the center channel, the third auditory exciter is the LFE, and so on.

You can rename unit buttons for ease of use. To rename a selected cell button, right-click the button.

In order to turn on soloing (monitoring) of the Auditory Stimulator, double-click on the selected unit number. Units in solo mode will glow yellow; to exit solo mode, double-click again. For dual-channel mode, only one unit can be in solo mode. For multichannel mode, one or more units can be soloed. To
To bypass the selected auditory exciter processing, press the selected unit number once Click + Shift. in bypass mode, the button will emit a red glow.

You can also copy all the auditory exciter settings to another unit. To do this, select the unit from which you want to copy the settings, then click the Copy button and select the unit to which you want to copy the settings.

Input Routing Input
Routing lets you choose between 44 common channel settings, from stereo to 7.1.4 and 9.1.6. Simply select the channel setting that's right for your track in the input routing module.

You can also create your own input routing profiles. There are 16 independent channels available.

Click the Edit button next to the Input Routing display. Hold down the Shift key and select the desired number of channels. Name the selected channels in order. Then click Save and name the profile.

64-bit: (VST2, VST3) + 32-bit: (VST2, VST3)

- Red Rock Sound does not support the AAX of the old PT 12.5, so there is no need to include the patched AAX.
- Use VST2, VST3 patched by Blue Cats PatchWork in PT 12.5 as a solution. 😉

Inspirer Immersive Aural Exciter
The Red Rock Sound Inspirer plug-in is developed to meet the growing demand for maximum apparent loudness in contemporary immersive music mixes.

While many existing techniques rely on compression and limiting to enhance modulation and create an exciting sound, the Inspirer takes these methods a step further. While many existing techniques rely on compression and limiting to enhance modulation and create an exciting sound, the Inspirer takes these methods a step further. capable of imparting the warmth and character inherent to analog consoles.

Save time and avoid tedious manual workarounds with the Inspirer plug-in designed from the ground up for fast, efficient work on mid/side, stereo and the objects, the beds (fixed channels) of immersive mixing environments.

Units
This module allows you to select an Aural Exciter from four available. The Aural Exciters are arranged in series, this allows you to process channels with The Aural Exciters are arranged in series, this allows you to process channels with different Exciter settings.
For example: the first Aural Exciter is only the mid channel, the second Aural Exciter is only the side channel, the third Aural Exciter is the left and right channel. For multi-channel modes: the first Aural Exciter is only the left and right channels, the second Aural Exciter is the center channel, the third Aural Exciter is the LFE, etc. The second Aural Exciter is the center channel. For multi-channel modes: the first Aural Exciter is only the left and right channels, the second Aural Exciter is the center channel, the third Aural Exciter is the LFE, etc.

You can rename unit Buttons for ease of use. To rename the selected Unit button, right-click on the button.

In order to turn on the solo (listen) of the Aural Exciter, double-click on the selected unit number. The unit in solo mode glows yellow, to exit solo mode, double-click again. The unit in solo mode glows yellow, to exit solo mode, double-click again. For two-channel modes, only one unit can be solo mode.
To bypass selected Aural Exciter processing, press the selected unit number one click + shift. In bypass mode, the button will glow red.

You can also copy all Aural Exciter settings to another unit. To do this, select the unit from which you want to copy the settings, then click on the copy button, then select the unit to which you want to copy the settings.

Input Routing
Input Routing lets you choose between 44 common channel setups, starting from Stereo up to 7.1.4 and 9.1.6. Simply select in the input routing module the Simply select in the input routing module the channel setup that fits your track.

You can also create your own input routing profiles. 16 independent channels are available.

Click on the edit button next to the input routing selection display. Hold down the shift button and select the desired number of channels. Then click save and name the profile.

64-bit: (VST2, VST3) + 32-bit: (VST2, VST3)

- Red Rock Sound doesn't support AAX with old PT 12.5, so no point including patched AAX.
- Use patched VST2, VST3 via Blue Cats PatchWork in PT 12.5 as solution. 😉

🏠 HomePage