[谐波饱和度插件] Wavegrove Mariform v1.0.1 [WiN]（10.7MB）

MOCHA | 18 November 2025 | 10.7 MB

安装方法：
安装前请卸载/移除任何旧版本！
* 安装
* 打开注册机并注册。
* 我们的注册机可能也适用于 macOS，但未经测试。请自行尝试。
尽情享受吧！
抗静电饱和与自然律动完美融合。
驱动力——调节谐波饱和度的强度。
• 区域——选择目标频区：低频、中频或高频。
• 区域光谱控制——用三个独立的饱和点微调每个范围。
阻抗——增加自然、动态的运动。
• 音调——遵循信号动态以实现有机音调响应。
• 颠簸——引入额外能量。
Mariform 由 Wavegrove 和 Tape Over 合作开发，融合了模拟变压器行为与精心调谐的谐波控制，带来有机的音乐响应。
Mariform的核心是一款定制变压器，专为实现逼真的变压器饱和而设计。无论你追求的是细腻的温暖，还是丰富复杂的和声驱动力，Mariform都通过其运动、音色和个性提供了真实的声音。
Mariform 是为乐器、乐队和混音总线设计的。需要带谐波的大低频吗？做。吉他和鼓镲片出现刺耳的刺？没有流剂。音色平坦的琴杆？不再是了。中段需要一些甜美的老牌角色吗？就像你奶奶烤的一样。
高频要精准对焦，低频时有强烈的冲击力。
更多功能：
• MariAir – 一款平滑的高频架式均衡器，用于空气和开放性。
• 剪辑器（前后剪辑）——选择在饱和前或后剪辑。
• 中侧处理——对单声道或侧声道施加饱和处理，以控制深度或宽度。
• 高切与低切——将处理限制在你期望的频率范围内。
• 校准——控制整体深度和阻抗响应。
• 输入与输出增益——调整增益分级以实现最佳谐波驱动。
• 混合——混合干信号和处理信号。
• 立体声与MS平衡——优化立体声位置。
• 中间/边路平衡——调整中间与侧面内容之间的关系。
• Delta监测——试听差别信号，听Mariform添加的内容。

我们的密钥生成器可能也能在macOS上使用，但还没经过测试。你自己试试

Antistatic saturation meets organic movement.
Drive – Adjust the intensity of harmonic saturation.
• Area – Choose the target frequency zone: Low, Mid, or High.
• Area Spectrum Control – Fine-tune each range with three independent saturation points.
Impedance – Adds natural, dynamic movement.
• Tone – Follows signal dynamics for organic tonal response.
• Bump – Introduces extra energy.
Developed in collaboration between Wavegrove and Tape Over, Mariform fuses analog transformer behavior with carefully tuned harmonic control for an organic, musical response.
At the heart of Mariform lies a custom transformer, engineered to deliver realistic transformer saturation. Whether you’re aiming for subtle warmth or rich, harmonically complex drive, Mariform provides an authentic sound through its movement, tonality and character.
Mariform is made for instruments, groups and the mix bus. Need a huge low end with harmonics? Done. Nasty spikes from guitars and drum cymbals? No flux given. A flat sounding stem? Not anymore. Mid range needs some sweet old character? As if baked by your grandmother.
Pin point targeted focus for high end, huge thump for your lows.
Further features:
• MariAir – A smooth high-frequency shelf EQ for air and openness.
• Clipper (Pre/Post) – Choose to clip before or after saturation.
• Mid/Side Processing – Apply saturation to mono or side channels for controlled depth or width.
• High Cut & Low Cut – Limit the processing to your desired frequency range.
• Calibration – Control the overall depth and impedance response.
• Input & Output Gain – Adjust gain staging for optimal harmonic drive.
• Blend – Mix between dry and processed signals.
• Stereo and MS Balance – Refine stereo placement.
• Mid/Side Balance – Adjust the relationship between mid and side content.
• Delta Monitoring – Audition the difference signal to hear what Mariform adds.

Our keygen might work for macOS too, but untested. try it yourself

MOCHA