[Cytomic插件套装]Cytomic Effects Bundle v2025.7-TeamCubeadooby [WiN]（39MB）

TeamCubeadooby | 11 July 2025 | 39 MB

安装方法：直接安装，免激活版本。
细致精准的模拟声音数字复制。直观易用，趣味十足。外观精美。
Drop 是一款模拟建模谐振滤波器插件，它基于经典模拟合成器滤波器，并融入了全新设计。模型细节丰富，赋予了它们惊人的驱动力和音色，以及流畅的音频速率调制特性。模型保留了电路的原始结构，以及所有主要非线性元件的位置和形状。
Glue 是一款模拟建模的压缩器插件，基于 80 年代经典的英式大型控制台总线压缩器，并添加了一些便捷的附加功能。这款压缩器动作流畅通透，因为它采用了与电路模拟器相同的高品质算法，但经过优化，运行速度更快。除了常规的压缩器控制功能外，它还具有：混音/范围/侧链高通旋钮、外部侧链支持、峰值削波和高级过采样。
Scream 是一款细节丰富的分立元件模型，以经典的绿色 Tube Screamer 踏板为原型。它拥有输入和输出 A 类晶体管缓冲器、Boyle 宏建模运算放大器以及一系列完全可定制的削波二极管。事实上，每个元件的数值都可以更改和随机化，以定制您的音色。您可以从包括硅、锗或 LED 在内的多种二极管中选择，以创建不对称削波组合，串联任意数量的二极管，甚至可以将它们全部旁路，从而获得高增益提升，然后削波运算放大器。
包含：
The Drop v1.9.0
The Glue v1.7.10
The Scream v1.2.14
发行说明：
The Drop V1.9.0（2025 年 7 月 11 日）
• 新功能：添加了新的滤波器电路 PT1，它是一个基于 SSM2040 的电路，类似于
Prophet 5 rev1中的电路
• 新功能：选择滤波器电路时添加了 Shift 修改器，以将 LP 和 HP 选择同步
到同一个电路
• 新功能：在 Settings.xml 文件中添加了“UiSoftwareRender”布尔选项，以
在硬件和软件渲染器之间全局切换
The Glue V1.7.10（2025 年 5 月 6 日）
• 修复：现在为 Glue UI 单独计算 VU 增益减少针位置，并将值
报告给 DAW，因此当 UI 关闭时，DAW VU 会按预期更新。The
Scream V1.2.14（2025 年 1 月 24 日）
• 修复：现在可以在原理图视图文本编辑器中输入 20 个字符来输入值
• 修复：MD 的预热现在将砰砰声消除到 -60 dBFS（在 -24 dBFS 时太大）。使用高清或高清渲染
来获得静音预热

x64：AAX、VST3、VST2 | x86：JBridge
更多信息：
https://cytomic.com/plug-ins/
只需安装即可。AppID 与上一版本相同。
如果您安装了单个程序，
请先卸载它们以保持系统清洁。
仅限 Windows 10 及以上版本
– 尽情享受吧！
TCD

Detailed & accurate digital replication of analog sound. Intuitive and fun to use. Beautiful to look at.
The Drop is an analog modelled resonant filter plug-in based on classic analog synth filters, as well as completely new designs. There is a huge level of detail in the models, which gives them amazing drive and tone, as well as smooth audio rate modulation behaviour. The original structure of the circuits is preserved in the model, as is the location and shape of all major non-linearities.
The Glue is an analog modelled compressor plug-in based on The classic 80’s British big console buss compressor with some handy additional features. The compressor action is smooth and transparent as it uses the same high quality algorithms used in circuit simulators, but optimised to run fast. In addition to the regular compressor controls it has: Mix / Range / Sidechain High Pass knobs, External Sidechain support, Peak Clip, and Advanced Oversampling.
The Scream is a very detailed discrete component model of the classic green Tube Screamer pedal. It has input and output class-A transistor buffers, Boyle macro modelled op-amps, and a selection of fully customisable clipping diodes. In fact every value of every component can be changed and randomised to customise your tone. Choose from a selection of diodes including silicon, germanium, or LEDs to create asymmetric clipping combinations, chain any number of diodes in series or even bypass them altogether and have a high gain boost that then clips the op-amp.
Included:
The Drop v1.9.0
The Glue v1.7.10
The Scream v1.2.14
Release Notes:
The Drop V1.9.0 (11 Jul 2025)
• New: added new filter circuit PT1, which is an SSM2040 based circuit like the one in the
Prophet 5 rev1
• New: added Shift modifier when selecting filter circuit to sync both the LP and HP selection
to the same circuit
• New: added “UiSoftwareRender” boolean option in Settings.xml file to globally switch
between hardware and software renderer
The Glue V1.7.10 (6 May 2025)
• Fix: VU gain reduction needle position now calculated separately for Glue UI and the value
reported to the DAW so when the UI is closed so the DAW VU updates as expected.
The Scream V1.2.14 (24 Jan 2025)
• Fix: can enter 20 characters now in schematic view text editors to enter values
• Fix: warmup of MD now de-thumps to -60 dBFS (was too loud at -24 dBFS). Use HD or HD Render
to get silent warmup

x64: AAX, VST3, VST2 | x86: JBridge
More info:
https://cytomic.com/plug-ins/
Just install. Same AppID as previous release.
If you have single items installed, uninstall them
first for system cleanliness.
Windows 10+ only
-Rock on and enjoy!
TCD