[AUDIO ANALYZER] Flux Pure Analyzer Essential v1.8.6 (UNLOCKED) [WiN, MacOSX] (382Mb)

WiN: Team R2R | 93.0 MB | MAC: C0SM1CSQU1D | 286 MB

This spectrum requires network support from Apple Bonjour, if the installation of Apple Bonjour in Flux_SampleGrabberV3_Windows_Installer_(3.4.6.37937) fails, you can follow the steps below.
1. Install Apple Bonjour (I'll provide it below)
2. Install Flux_SampleGrabberV3_Windows_Installer_(3.4.6.37937) [Do not check Apple Bonjour].
3. Insert the SampleGrabber into any DAW (inserting it into a DAW on any computer on the LAN also allows communication)
4. Open Pure Analyzer Essential and select the name named in SampleGrabber from the source in the upper left corner.
5. Enjoyment

The various analysis tools needed are included: level meters, frequency saturation, phase correction, dynamic range, etc.

Pure Analyzer System - Next Generation RTA (Real Time Analyzer) System

The Flux::Pure Analyzer System is a network-driven, modular RTA system that offers a wide range of analyzer options for any conceivable audio analysis and measurement application

For maximum flexibility and efficiency, Pure Analyzer offers the ability to utilize the sample collector'splug-in (software component)Options for separating signal acquisition from analysis In addition to the sample collector plug-in, Pure Analyzer provides I/O support for ASIO and Core for sound.

Sample Collector
The Sample Collector is a standard DAW plug-in available in all common formats (VST, AU, RTAS and TDM) that collects the source and response signals and sends them over the network using the ZeroConf/Apple Bonjour protocol.

You can insert as many instances of the Sample Collector plug-in as you need into the same DAW, different DAWs, or even completely different computers, and the Sample Collector also supports surround sound configurations. Network configuration settings for the Pure Analyzer system are fully automated and transparent to the user.

At a sampling rate of 44.1kHz, audio transmission requires approximately 1.4Mbps per channel, so a properly configured standard Ethernet 100Mbps network should be sufficient for most situations. A 5.1 configuration at 96kHz requires slightly less than 20Mbps. Of course, these requirements do not apply when using a sample collector and analyzer on the same hardware.

Pure Analyzer Essentials
The foundation of the Pure Analyzer system is a standalone application, Pure Analyzer Essential, which can be extended with real-time, metering/loudness and surround sound analysis modules and performs graphical analysis rendering using the GPU's efficient 2D/3D graphics engine. The engine is based on the OpenGL standard and uses the GPU on the built-in graphics card to optimize the audiovisual experience.

The Pure Analyzer Essential application receives sample feeds from sample collectors and analyzes them in real time. Pure Analyzer provides the option to receive data from a number of different sample collector plug-ins on the network and analyze the received data in parallel by selecting the actual corresponding sample collector as the current analysis source at the click of a button. In addition, the input stream from the physical ASIO/Core Audio I/O can be selected as the current analysis source in the same simple manner.

add-on module
As a complement to Pure Analyzer Essential, three different add-on modules are currently offered, each of which provides specific tools for its actual area of use. In order to use any of the add-on modules, Pure Analyzer Essential is required.

The available add-on modules are:
Pure analyzer metering
Pure Analyzer Site
Pure Multi-Channel Analyzer

C0SM1CSQU1D Note: (v1.8.6 (unlocked))
That's another solution that
Ported Pure Analyzer ked v1.8.6 - (R2R realese) to Mac users 🙂
Use Wineskin with jack-ASIO (win) pre-installed.
Wine is set to receive audio from Loopback, but can be replaced with jack-osx or soundflower
I use loopback because I have nothing to set ...... it works.
Therefore, please set the Loopback (Jack-osx or Soundflower) in the output of the DAW.

Pure Analyzer System - The Next Generation RTA (Real Time Analyzer) System

The Flux:: Pure Analyzer System is a network-driven modular RTA-system providing an extensive range of analyzer options for any imaginable audio analysis and measurement applications

For maximum flexibility and efficiency, Pure Analyzer presents the option to separate the signal acquisition from the analysis utilizing a Sample grabber plug-in, and in addition to the Sample grabber plug-in, Pure Analyzer also provide I/O support for ASIO and Core Audio. For maximum flexibility and efficiency, Pure Analyzer presents the option to separate the signal acquisition from the analysis utilizing a Sample grabber plug-in, and in addition to the Sample grabber plug-in, Pure Analyzer also provide I/O support for ASIO and Core Audio.

Sample Grabber
Sample grabber is a standard DAW plug-in available in all common formats (VST, AU, RTAS and TDM) that acquires the source and response signals and sends the signal through the network using the ZeroConf/Apple Bonjour protocol. Sample grabber is a standard DAW plug-in available in all common formats (VST, AU, RTAS and TDM) that acquires the source and response signals and sends the signal through the network using the ZeroConf/Apple Bonjour protocol.

You can insert as many instances of Sample grabber plug-ins as required, on the same DAW, different DAWs, and even different computers altogether, and the You can insert as many instances of Sample grabber plug-ins as required on the same DAW, different DAWs, and even different computers altogether, and the Sample grabber also support surround configurations. The network configuration setup for the Pure Analyzer System is entirely automatic and transparent to the user.

The audio transport requires approximately 1.4Mbps for each channel at a sample rate of 44.1kHz, so a properly configured standard Ethernet 100Mbps network should be more than sufficient to handle most cases. The audio transport requires approximately 1.4Mbps for each channel at a sample rate of 44.1kHz, so a properly configured standard Ethernet 100Mbps network should be more than sufficient to handle most cases. do not apply when using both Sample grabber and analyzer on the same hardware.

Pure Analyzer Essential
The foundation of the Pure Analyzer System is a standalone application, Pure Analyzer Essential, which can be extended with modules for Live, Metering/ Loudness and Surround analysis, performing the graphic analysis rendering using a GPU-efficient 2D/3D graphic engine. Loudness and Surround analysis, performing the graphic analysis rendering using a GPU-efficient 2D/3D graphic engine. The engine is based on the OpenGL standard optimizing the audio-to-visual experience utilizing the GPU on the GPU. The engine is based on the OpenGL standard optimizing the audio-to-visual experience utilizing the GPU on the built in graphics card.

The Pure Analyzer Essential application receives the sample feeds from the Sample grabber and analyzes them in real time. The Pure Analyzer provides the option to receive data from several different Sample grabber plug-ins on the network, and analyze the received data in parallel by selecting the actual data in parallel. option to receive data from several different Sample grabber plug-ins on the network, and analyze the received data in parallel by selecting the actual The Pure Analyzer provides the option to receive data from several different Sample grabber plug-ins on the network, and analyze the received data in parallel by selecting the actual corresponding Sample grabber to be the current source for the analysis with a simple button click. In addition to this, the input streams from the physical ASIO/Core Audio I/O can also be selected as the current source for the analysis in the same simplistic fashion.

Add-on Modules
As a complement to the Pure Analyzer Essential, three different add-on modules, all providing specific tools for their actual field of usage, are currently available. As a complement to the Pure Analyzer Essential, three different add-on modules, all providing specific tools for their actual field of usage, are currently available.

Available add-on modules are.
Pure Analyzer Metering
Pure Analyzer Live
Pure Analyzer Multichannel

C0SM1CSQU1D Note.(v1.8.6 (UNLOCKED))
Again it's a workaround.
porting Pure Analyzer ked v1.8.6 - (R2R realese) to Mac Users 🙂
Wineskin is used and jack-ASIO (win) was pre-installed.
Wine is set to recieve audio from Loopback but it can be replaced by jack-osx or soundflower
I use loopback cause i've nothing to set ... it works.
So set Loopback (Jack-osx or Soundflower) in your DAW's output.